Problems may arise if a roofing contractor makes errors while installing your roof. Bad craftsmanship may result in damage, inconvenience, and expensive repairs.

Your house will only be shielded from heavy winds and storms if it has a sturdy roof. Choosing a professional roofing contractor (such as Wayne NJ Roofing) to install your roof correctly is critical to the safety of your property.

Continue reading to discover if your roof was installed incorrectly built and how to prevent this from happening again.

How to Determine Whether Your Roof Was Inadequately Installed

1. Missing shingles

Shingles are the most critical component of any roofing system and form the framework of your roof. Missing shingles put your most valuable investment in danger of expensive damage and indicate that your roof was improperly constructed. Your roofer should have adequate expertise to guarantee your roof is completely covered with shingles.

2. Improper shingle alignment

See how the roof shingles line up to see whether you have a poorly fitted top. They tend to seem sloppy if they need to be correctly aligned, which implies that they won’t give the protective covering they were supposed to provide. Moisture infiltration may harm your roof and roof deck if there are fractures or holes between misaligned roof tiles.

3. The previous roof was left intact (under your new roofing)

If your present roof were placed on top of your previous roof, your new one would likely sustain damage sooner than if your old one was removed. Putting new roof shingles over old ones is an expensive blunder in the roofing business!

4. Incorrect nail length or placement

If you observe missing shingles after a storm, it might be because the nails were not adequately lengthened or placed. Correct nailing procedures are critical for the functionality of your roof. Each kind of roofing shingle requires its nail. If your shingles seem detached or skewed, your roof was most likely improperly placed and should be investigated. A good roofing contractor will carefully attach your shingles and avoid excessive overhang. During storms or severe winds, your roof shingles might be damaged or removed if nails are not used properly.

5. Poor attic ventilation

Your attic should be well-ventilated through ridge vents and roof soffits. A poorly ventilated attic might cause your roof to deteriorate more quickly than it should. Moisture collection in your attic may cause flashing to rust, resulting in costly leaks. Excessive moisture also encourages mold and mildew development under your shingles, causing them to deteriorate.

If you detect ice dams on your roof during the winter, it suggests your attic needs to be adequately aired. If your attic is overheating in the summer, it’s probably because it’s not sufficiently ventilated. Proper attic ventilation is one of the most important components for your roof to function properly during its lifetime. If a roofing contractor fails this step, issues will arise.

6. Lack of a drip edge

A drip edge is a metal flashing added at the borders of your roof to restrict water running away from the fascia and preserve your underlying roof components. Your drip edge extends over the edges of your roof and has a tiny metal overhang curved away from the fascia. If your roofer failed not to install a drip edge, water may collect underneath your shingles and cause damage to your property.

7. No roof ridge cap

Ridge caps enable air to move through your attic and protect your property from harm. This critical roofing component must be correctly placed and maintained to prevent moisture from entering your house. If installers use improper or shorter nails to fasten the ridge cap to your home, it will leak.

8. Unsecured flashing

Flashing is a thin steel material used around chimneys, vents, and skylights. If it is pulling up from your roof, it likely wasn’t placed correctly. If your roof is not securely sealed around solar panels, skylights, vents, or chimneys, your property is vulnerable to moisture incursion, and expensive repairs are inevitable.

9. Rotted roof decking

A deteriorating roof might be dangerous. It might collapse on itself and injure you and your loved ones. If your roof was not constructed correctly and moisture has entered your decking to the point that it is deteriorating, it is time to repair it!

10. Non-uniform appearance

If your roof is correctly installed, it will have a constant appearance. If you do a visual check and see places that do not match the rest of your roof, you may need a more adequately installed roofing system.

Get Reliable Roofing Installation

Knowing your house is safe provides you peace of mind throughout the storm. With over 60,000 completed roofing jobs under our belt, you can rely on https://www.waynenjroofing.com/ to provide the finest roofing installation with a customer-first attitude.

After your roof replacement is finished, you’ll appreciate your home’s improved exterior appeal and have peace of mind knowing that your roof was done. An experienced, well-trained team of professionals follows the manufacturer’s guidelines.

Please take a minute to read more about our roofing services.

You might also enjoy: